烟气CO2捕集热能梯级利用节能工艺耦合优化

醇胺法捕集CO₂技术是一种较成熟的CO₂捕集技术，具有吸收速度快、脱除效果好等显著优点，但其操作费用高、解吸能耗大。本文以降低醇胺法捕集烟气中CO₂系统再生能耗为出发点，对常规醇胺法捕集CO₂工艺统进行了节能优化研究。在常规工艺流程基础上引入压缩式热泵节能技术，并利用Aspen Plus软件建立了基于压缩式热泵技术的CO₂捕集工艺流程模型。研究了压缩式热泵与机械蒸汽压缩回收（MVR）热泵、分流解吸、分布式换热、级间冷却4种节能工艺耦合，通过模拟计算与优化，结果说明了最佳节能工艺组合为“解吸塔压缩式热泵+贫液MVR热泵+分流解吸+级间冷却”耦合的CO₂捕集工艺流程，当解吸塔顶气体分流比为0.25∶0.75、冷富液分流比为0.05∶0.95、级间冷却器位于吸收塔17块塔板位置、吸收塔输入冷量为-3.0GJ/h时，系统再生能耗最低，为2.533 GJ/tCO₂，相比常规有机胺工艺（再生能耗4.204GJ/tCO₂）节能率39.748%。     

大方坯结晶器电磁搅拌器结构优化

为改善连铸结晶器内钢液的流动状况，采用有限元法和有限容积法研究了大方坯结晶器电磁搅拌器结构对连铸结晶器内电磁场、流场和温度场分布的影响。结果表明，新型结晶器电磁搅拌器在400 A、3 Hz时产生的电磁力比传统结晶器电磁搅拌器在500 A、3 Hz时产生的电磁力更加均匀，对结晶器内钢液的扰动更强，可提高结晶器内的传热效率，有助于初始凝固坯壳和等轴晶的形成，改善方坯质量。     

γ辐照加工用新型工作模体设计研究

本文研究设计了一种用于获取γ辐照装置辐射场和货物剂量场真实分布的新型工作模体。基于真实γ辐照装置参数构建了有效可用的模拟辐射场，提出了新型工作模体的结构和填料设计方法。采用蒙特卡罗方法和随机填充方法（RCS）模拟计算剂量计套管材料与壁厚、填料小球尺寸、空心填料小球尺寸与壁厚、小球填充方式等影响模体剂量学性能的主要因素的分布规律。在满足计算置信度的前提下，参数优化取值范围为：套管采用壁厚为3~5 mm的铝管，对辐射场干扰不超过4.372 23%；填料选择外径为1~4 cm、壁厚为1.1~11.5 mm、材料等效性好、货物密度模拟范围为0.1~0.5 g/cm³的聚丙烯小球，对辐射场干扰不超过9.998 44%；均匀填充和随机填充模式对辐射场干扰基本持平，且均不超过10%。结果表明，当前设计可行有效，投入低、兼顾参数多且量程更宽，适合推广应用。     

A novel minimum weight formulation of topology optimization implemented with reanalysis approach

In this paper, we develop an efficient diagonal quadratic optimization formulation for minimum weight design problem subject to multiple constraints. A high-efficiency computational approach of topology optimization is implemented within the framework of approximate reanalysis. The key point of the formulation is the introduction of the reciprocal-type variables. The topology optimization seeking for minimum weight can be transformed as a sequence of quadratic program with separable and strictly positive definite Hessian matrix, thus can be solved by a sequential quadratic programming approach. A modified sensitivity filtering scheme is suggested to remove undesirable checkerboard patterns and mesh dependence. Several typical examples are provided to validate the presented approach. It is observed that the optimized structure can achieve lighter weight than those from the established method by the demonstrative numerical test. Considerable computational savings can be achieved without loss of accuracy of the final design for 3D structure. Moreover, the effects of multiple constraints and upper bound of the allowable compliance upon the optimized designs are investigated by numerical examples.     

基于(火用)效率目标的环冷机余热回收系统操作参数优化

摘要：针对烧结环冷机余热回收利用率不高的难题，采用分析法建立了评价某钢铁厂烧结环冷机余热回收系统运行效率的效率模型。基于多孔介质模型、局部非热平衡方程、真实气体SRK方程建立环冷机内气固两相换热模型。通过CFD仿真模拟，探究料层高度、循环风机输入烟气温度、烧结矿底部入口风速三项可控环冷机运行工艺参数对系统效率的影响规律。结果表明，料层厚度在1～1.5 m区间每增加0.1 m，效率增加0.8%～1.1%；循环风温在100～140℃之间每增加10℃，效率增加1.4%～1.5%；烧结矿底部入口风速在0.9～1.9 m/s之间每增加0.1 m/s，效率降低0.18%～0.24%。在此基础上，基于工业运行数据建立效率正交试验优化模型，提高了该余热回收系统3.42%的效率。     

基于协同优化算法的流速仪检定系统设计

提出了一种小型轻便的流速仪检定系统的设计方案,并运用改进的多学科协同优化方法求解各学科设计变量的最优解。首先介绍了算法思想及改进措施,并根据系统设计要求建立了各学科的设计变量、目标函数和约束条件；其次,运用遗传算法求解各学科设计变量的最优解,并根据优化结果完善了系统的设计方案,同时运用计算机仿真等方法验证了优化结果的可行性。结果表明,优化后的检定系统满足流体力学效应、匀速运动时间、系统重量等设计要求,同时证明了协同优化算法解决多学科设计优化问题的有效性。     

A hierarchical simple particle swarm optimization with mean dimensional information

To reduce the negative influence of the overemphasis of gbest the dimensional information of particle is introduced to be a new example. This additional information source is incorporated into simple PSO to establish a simpler position model. Another two simpler position updating models, cognition only model and social only model, based on the simple PSO algorithm are presented as well. Time hierarchy strategy is extended from probability hierarchy, both aiming to make full use of advantages of three models. Three models are used with time or probability hierarchy to update each particle’s position. Thus, two proposed algorithms THSPSO and PHSPSO are finally obtained. Experiments are conducted on fifteen benchmark functions. The results demonstrate the two proposed algorithms both have excellent performances for basic functions compared with other popular PSO variants. Probability hierarchy strategy is more effective than time hierarchy strategy in general.     

粒子群属性聚类的位置隐私保护

针对基于位置服务中连续查询情况下，用户自身属性信息很容易被攻击者获取，并通过关联获得用户位置隐私的情况，提出了一种利用粒子群聚类加速相似属性用户寻找，并由相似属性匿名实现用户位置泛化的隐私保护方法。该方法利用位置隐私保护中常用的可信中心服务器，通过对发送到中心服务器中的查询信息进行粒子群属性聚类，在聚类的过程中加速相似属性用户的寻找过程，由相似属性用户完成位置泛化，以此实现位置隐私保护。实验结果证明，这种基于粒子群属性聚类的隐私保护方法具有高于同类算法的隐私保护能力，以及更快的计算处理速度。     

A flexible air separation process: 1. Design and steady-state optimizations

The flexible operation of energy-intensive processes, such as cryogenic air separation, has economic potential due to increasing fluctuations of the electricity markets. Multiproduct air separation processes with high ratios of liquid product are very promising for flexible operation due to storable products. We present a process design with an integrated liquefication cycle and liquid assist operation, that facilitates a high liquid product ratio and a flexible process operation. We use a mechanistic dynamic process model in steady-state process optimizations covering the wide operational range of the proposed process. The optimization results show that the power demand can be varied in a range from 3.5 to 28 MW without violating operational constraints by changing the nitrogen and oxygen production rates. Thus, the proposed process is a promising air separation candidate for flexible operation with respect to fluctuating electricity markets.     

An engineering method for complex structural optimization involving both size and topology design variables

This work presents an engineering method for optimizing structures made of bars, beams, plates, or a combination of those components. Corresponding problems involve both continuous (size) and discrete (topology) variables. Using a branched multipoint approximate function, which involves such mixed variables, a series of sequential approximate problems are constructed to make the primal problem explicit. To solve the approximate problems, genetic algorithm (GA) is utilized to optimize discrete variables, and when calculating individual fitness values in GA, a second-level approximate problem only involving retained continuous variables is built to optimize continuous variables. The solution to the second-level approximate problem can be easily obtained with dual methods. Structural analyses are only needed before improving the branched approximate functions in the iteration cycles. The method aims at optimal design of discrete structures consisting of bars, beams, plates, or other components. Numerical examples are given to illustrate its effectiveness, including frame topology optimization, layout optimization of stiffeners modeled with beams or shells, concurrent layout optimization of beam and shell components, and an application in a microsatellite structure. Optimization results show that the number of structural analyses is dramatically decreased when compared with pure GA while even comparable to pure sizing optimization.